The primer and the wood floor coatings: how to apply Solid
Wood floors are an important part of house furniture. It happens very often to start from wood flooring in order to design the entire house. Today, thanks to a big range of coatings, parquets can be colorful.
Solid. Discover water-based wood floor coatings
The choice of Solid wood coatings affects aesthetical, durability and healthy performances. Solid water-based wood coatings are the best choice for eco-friendly people.
But the quality of parquets also depends on wood essence and set in.
In order to finish a wood floor, the well-known technique is coating, even if wood floor wax and wood floor oil can wholly satisfy any need. A wood coating also guarantees an easy maintenance. But what should you do in order to coat your parquet?
APPLY A WOOD FLOOR PRIMER
Before applying a topcoat, you have to treat a your wood floor with SolidBase primer
- If your parquet is new, it will be sufficient to add a 10% of the hardener Solid 2K, mix well and apply the primer with a brush or a paint roller.
- If your parquet is already coated, you need to eliminate the coat with a chemical paint remover. Then, you should block pores and imperfections with SolidFiller. Finally, you should sand down lightly. Then start back to point 1.
If your parquet coating is a bit damaged, you should use a spatula or an orbital in order to remove the film. You should block pores and imperfections with SolidFiller. Finally, you should sand down lightly. Then start back to point
APPLY WATER-BASED COATINGS FOR PARQUET
Application with brush or paint roller
Paint roller or brush coating are the most common application techniques. Water-based coatings for wood floors Solid must be mixed with the additive Solid 2K. If you need a second coat, you only have to wait 4 hours. It’s easy, isn’t it?
Application with spray gun
Solid topcoats can be applied on parquet with a spray gun able to block pores. This process give a uniform and clear color to your parquet.
